The Color White Within A Diamond Indicates (2023)

FAQs

What does the color white within a diamond indicates? ›

The NFPA diamond is broken up into four colored sections each labeled with a number from 0-4 to indicate the level of hazard. The red section serves as an indicator of flammability; blue health risk; yellow for reactivity/explosivity; and white for describing special hazards.

The National Fire Association (NFPA) has developed a color-coded number system called NFPA 704. The system uses a color-coded diamond with four quadrants in which numbers are used in the upper three quadrants to signal the degree of health hazard (blue), flammability hazard (red), and reactivity hazard (yellow).

The white diamond has codes for "special hazards." For example, if a chemical like ammonium nitrate should not touch water because it will explode, a W with a line through it will be written in the white diamond.

The color bar is not for emergencies and is used to convey broader health warning information. The four bars are color coded, using the modern color bar symbols with blue indicating the level of health hazard, red for flammability, orange for a physical hazard, and white for Personal Protection.

What is Diamond Color? The Color of a diamond actually refers to the lack of color in a diamond, with perfectly colorless diamonds considered the highest quality with the highest value, and brown or yellow diamonds being the lowest quality.

The majority of mined diamonds fall between white and pale yellow or brown; what is known as the normal color range. Diamonds of more intense color (usually yellow, but in some cases red, green or blue) are termed fancy color diamonds. Black diamonds are also fancy color diamonds.

The four divisions are typically color-coded with red on top indicating flammability, blue on the left indicating level of health hazard, yellow on the right for chemical reactivity, and white containing codes for special hazards.

The NFPA 704 hazard identification system is characterized by a diamond which is more precisely defined as a “square-on-point” shape. It identifies the degree of severity of the health, flammability, and instability hazards.

Instability, or reactivity, is shown in the yellow area. This part of the color code is for materials that could be unstable during an emergency situation. Instability can vary from minor chemical changes to explosive reactions. The last section of the NFPA color code is white.

Diamond meaning associations

Diamonds are associated with strength, love and health. As we have uncovered, throughout history, diamonds have been worn by leaders or power figures to symbolise strength and invincibility. Diamonds have also been associated with good health and represent long life and good heart health.

What color is diamond fire? ›

Fire is the rainbow-colored sparkle that you see in a diamond. It's very beautiful and desirable in a stone. Diamonds are among the gemstones with the most fire. The quality of a diamond's cut will heavily influence how much fire it will have.

The fire of a diamond doesn't mean it is literally on fire, but rather is a reference to the colourful flashes of light that the stone diffuses whilst under the light. It's otherwise known as 'light dispersion' as this is an accurate description of how the colourful flashes are formed.

Fire - #aa4203 Hex Code, Shades and Complementary Colors.

All of the companies use the color red for flammability, blue for health, and yellow for reactivity as taken from the National Fire Protection Association (NFPA) color code system. Most chemical suppliers use white for contact hazard.

Colorless diamonds are “icy” white, and near-colorless diamonds do not show any obvious body color to most observers. Ideal cut diamonds appear whiter than average cuts and diamond color is more noticeable from the side where the influence of light return does not impact your perception of color.

While color refers to the diamond's tint, clarity assesses imperfections. For most, the goal is to select a diamond that appears white and is free of visible inclusions, ensuring both beauty and value. In this article we discuss both diamond color and clarity and how to find the perfect balance for the perfect diamond.

You'll often hear the term “white” applied to colorless diamonds that fall within the GIA D-to-Z color scale or chart. But diamonds in the D-to-Z range are not white at all. Their hues can range from colorless (like a drop of pure water) to having tints of light yellow, light brown or gray.

A completely colorless diamond looks bright white. All diamonds, however, come in three tints — yellow, brown and grey that can range from nearly imperceptible to quite obvious.